SpraySeal R-200 is an environmentally safe dual component spray applied 'instant-set' protective coating specifically designed to provide heavy-duty waterproof protection for roofing restoration and new construction. When cured, the product forms a seamless and fully adhered surface membrane.
SpraySeal R-200 strongly adheres to most roof substrates, providing waterproofing performance that is not affected by strong sunlight or airborne contaminants. It bonds extremely well with AcriSeal to provide a bright white surface that will not delaminate.
SpraySeal R-200 is cold applied, requiring no open flame or heaters. A dual component instant set system sprayed in conjunction with an inorganic solution, it sets instantly allowing contractors to walk and work on the surface with no stickiness or tracking.
SpraySeal R-200 is an elastomeric modified bitumen emulsion applied to restore the waterproof performance of tar & gravel roofing (BUR), rolled roofing membranes, corrugated steel roofing, plywood and asbestos panels and can be applied over polyurethane foam or polystyrene board insulation.
SpraySeal R-200 is a water based, environmentally safe alterna- tive to solvent based protective coatings. It is easier to use than rolled roofing membranes and provides excellent waterproofing and chemical resistance through a highly flexible seamless membrane that resists cracking and aging.
SpraySeal R-200 is unaffected by acid rain or high intensity sunlight and is resistant to many airborne chemical pollutants found in industrial areas.
- UL listed/ Class 'A' approval (ballasted)
- Non Toxic/CEO-Friendly + water based
- No smell or disturbance during installation
- VOC Free
- Over 800 % Elongation
- ASTM Approvals: El 54. D142 (biological resistance)
- Can be used in lieu of hot-applied asphaltic waterproofing products
- CGSB37-GP-56 (impact resistance)
- Water tightness after impact
- CGI 55 (retention of tensile strength)
- After 250hrs (accelerated weather test)
- D412 (tensile strength)
- C836 (adhesion to concrete)
- D714 (no blistering)
- F1677 (abrasion resistance)
- E96 (water vapour permeance)
- E2178 (air permeance)
- C518-04 (thermal resistance)
- Highly flexible (over 800% elongation with memory)
- Watertight
- Extremely resilient
- Provides a seamless membrane
- Spray applied Odour free
- Cost effective
- Ideal substrate for AcriSeal
SpraySeal R200 provides the strength and performance that you demand from a waterproofing product. While AcriSeal provides the reflective barrier that will further extend and protect the roof system it covers.
SpraySeal R200+AcriSeal are water based products that contain no harmful chemicals & are environmentally friendly. All products are manufactured in Canada with case studies dating back to the late 90's.
SpraySeal R200 + AcriSeal can both be applied to many suitable, existing roof substrates including:
- BUR
- Mod-bit
- EPDM
- Concrete
- Ashphalt
In addition, the products boast some Of the following benefits:
- Made to withstand extreme climate changes
- Significantly extend the life Of the roof it covers
- LEED credit 7.2 ( Reduction of" Heat Island" effect)
- Keeps homes / buildings cooler in hot summer months
- Cut air condithioning costs by 20-30%
- Increase efficiency Of solar panels by reflecting UV rays
- Longer roof life & better durability - coatings protect the roof substrate from destructive UV Reduced maintenance costs over the roof's lifespan with the added bonus of being a water-resistant barrier
- Better budget management due to predictable life extension Of the roof - the opportunity to re-coat the roof rather than replace it
- Minimal disruption to the occupants, operations during application & construction process, saving money in areas other than the roofing materials and application itself
- A more desirable and comfortable work environment
